diff --git a/board/denx/ma5d4evk/ma5d4evk.c b/board/denx/ma5d4evk/ma5d4evk.c
new file mode 100644
index 0000000..ec0fa28
--- /dev/null
+++ b/board/denx/ma5d4evk/ma5d4evk.c
@@ -0,0 +1,412 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/atmel_mpddrc.h>
+#include <asm/arch/atmel_usba_udc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/sama5d3_smc.h>
+#include <asm/arch/sama5d4.h>
+#include <atmel_hlcdc.h>
+#include <atmel_mci.h>
+#include <lcd.h>
+#include <mmc.h>
+#include <net.h>
+#include <netdev.h>
+#include <spi.h>
+#include <version.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_ATMEL_SPI
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+}
+
+static void ma5d4evk_spi0_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* SPI0_MISO */
+	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* SPI0_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* SPI0_SPCK */
+
+	at91_set_pio_output(AT91_PIO_PORTC, 3, 1);	/* SPI0_CS0 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+#endif /* CONFIG_ATMEL_SPI */
+
+#ifdef CONFIG_CMD_USB
+static void ma5d4evk_usb_hw_init(void)
+{
+	at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
+	at91_set_pio_output(AT91_PIO_PORTE, 14, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	.vl_col			= 800,
+	.vl_row			= 480,
+	.vl_clk			= 33500000,
+	.vl_bpix		= LCD_BPP,
+	.vl_tft			= 1,
+	.vl_hsync_len		= 10,
+	.vl_left_margin		= 89,
+	.vl_right_margin	= 164,
+	.vl_vsync_len		= 10,
+	.vl_upper_margin	= 23,
+	.vl_lower_margin	= 10,
+	.mmio			= ATMEL_BASE_LCDC,
+};
+
+/* No power up/down pin for the LCD pannel */
+void lcd_enable(void)	{ /* Empty! */ }
+void lcd_disable(void)	{ /* Empty! */ }
+
+unsigned int has_lcdc(void)
+{
+	return 1;
+}
+
+static void ma5d4evk_lcd_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTA, 24, 1);	/* LCDPWM */
+	at91_set_a_periph(AT91_PIO_PORTA, 25, 0);	/* LCDDISP */
+	at91_set_a_periph(AT91_PIO_PORTA, 26, 0);	/* LCDVSYNC */
+	at91_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* LCDHSYNC */
+	at91_set_a_periph(AT91_PIO_PORTA, 28, 0);	/* LCDDOTCK */
+	at91_set_a_periph(AT91_PIO_PORTA, 29, 1);	/* LCDDEN */
+
+	at91_set_a_periph(AT91_PIO_PORTA,  0, 0);	/* LCDD0 */
+	at91_set_a_periph(AT91_PIO_PORTA,  1, 0);	/* LCDD1 */
+	at91_set_a_periph(AT91_PIO_PORTA,  2, 0);	/* LCDD2 */
+	at91_set_a_periph(AT91_PIO_PORTA,  3, 0);	/* LCDD3 */
+	at91_set_a_periph(AT91_PIO_PORTA,  4, 0);	/* LCDD4 */
+	at91_set_a_periph(AT91_PIO_PORTA,  5, 0);	/* LCDD5 */
+	at91_set_a_periph(AT91_PIO_PORTA,  6, 0);	/* LCDD6 */
+	at91_set_a_periph(AT91_PIO_PORTA,  7, 0);	/* LCDD7 */
+
+	at91_set_a_periph(AT91_PIO_PORTA,  8, 0);	/* LCDD9 */
+	at91_set_a_periph(AT91_PIO_PORTA,  9, 0);	/* LCDD8 */
+	at91_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* LCDD10 */
+	at91_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* LCDD11 */
+	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* LCDD12 */
+	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* LCDD13 */
+	at91_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* LCDD14 */
+	at91_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* LCDD15 */
+
+	at91_set_a_periph(AT91_PIO_PORTA, 16, 0);	/* LCDD16 */
+	at91_set_a_periph(AT91_PIO_PORTA, 17, 0);	/* LCDD17 */
+	at91_set_a_periph(AT91_PIO_PORTA, 18, 0);	/* LCDD18 */
+	at91_set_a_periph(AT91_PIO_PORTA, 19, 0);	/* LCDD19 */
+	at91_set_a_periph(AT91_PIO_PORTA, 20, 0);	/* LCDD20 */
+	at91_set_a_periph(AT91_PIO_PORTA, 21, 0);	/* LCDD21 */
+	at91_set_a_periph(AT91_PIO_PORTA, 22, 0);	/* LCDD22 */
+	at91_set_a_periph(AT91_PIO_PORTA, 23, 0);	/* LCDD23 */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+
+#endif /* CONFIG_LCD */
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+/* On-SoM eMMC */
+void ma5d4evk_mci0_hw_init(void)
+{
+	at91_set_b_periph(AT91_PIO_PORTC, 5, 1);	/* MCI1 CDA */
+	at91_set_b_periph(AT91_PIO_PORTC, 6, 1);	/* MCI1 DA0 */
+	at91_set_b_periph(AT91_PIO_PORTC, 7, 1);	/* MCI1 DA1 */
+	at91_set_b_periph(AT91_PIO_PORTC, 8, 1);	/* MCI1 DA2 */
+	at91_set_b_periph(AT91_PIO_PORTC, 9, 1);	/* MCI1 DA3 */
+	at91_set_b_periph(AT91_PIO_PORTC, 10, 1);	/* MCI1 DA4 */
+	at91_set_b_periph(AT91_PIO_PORTC, 11, 1);	/* MCI1 DA5 */
+	at91_set_b_periph(AT91_PIO_PORTC, 12, 1);	/* MCI1 DA6 */
+	at91_set_b_periph(AT91_PIO_PORTC, 13, 1);	/* MCI1 DA7 */
+	at91_set_b_periph(AT91_PIO_PORTC, 4, 0);	/* MCI1 CLK */
+
+	/*
+	 * As the mci io internal pull down is too strong, so if the io needs
+	 * external pull up, the pull up resistor will be very small, if so
+	 * the power consumption will increase, so disable the internal pull
+	 * down to save the power.
+	 */
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_MCI0);
+}
+
+/* On-board MicroSD slot */
+void ma5d4evk_mci1_hw_init(void)
+{
+	at91_set_c_periph(AT91_PIO_PORTE, 19, 1);	/* MCI1 CDA */
+	at91_set_c_periph(AT91_PIO_PORTE, 20, 1);	/* MCI1 DA0 */
+	at91_set_c_periph(AT91_PIO_PORTE, 21, 1);	/* MCI1 DA1 */
+	at91_set_c_periph(AT91_PIO_PORTE, 22, 1);	/* MCI1 DA2 */
+	at91_set_c_periph(AT91_PIO_PORTE, 23, 1);	/* MCI1 DA3 */
+	at91_set_c_periph(AT91_PIO_PORTE, 18, 0);	/* MCI1 CLK */
+
+	/*
+	 * As the mci io internal pull down is too strong, so if the io needs
+	 * external pull up, the pull up resistor will be very small, if so
+	 * the power consumption will increase, so disable the internal pull
+	 * down to save the power.
+	 */
+	at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
+
+	/* Deal with WP pin on the microSD slot. */
+	at91_set_pio_output(AT91_PIO_PORTE, 16, 0);
+	at91_set_pio_pulldown(AT91_PIO_PORTE, 16, 1);
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_MCI1);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int ret;
+
+	/* De-assert reset on On-SoM eMMC */
+	at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
+	at91_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
+
+	ret = atmel_mci_init((void *)ATMEL_BASE_MCI0);
+	if (ret)	/* eMMC init failed, skip it. */
+		at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
+
+	/* Enable the power supply to On-board MicroSD */
+	at91_set_pio_output(AT91_PIO_PORTE, 17, 0);
+
+	ret = atmel_mci_init((void *)ATMEL_BASE_MCI1);
+	if (ret)	/* uSD init failed, power it down. */
+		at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
+
+	return 0;
+}
+#endif /* CONFIG_GENERIC_ATMEL_MCI */
+
+#ifdef CONFIG_MACB
+void ma5d4evk_macb0_hw_init(void)
+{
+	at91_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* ETXCK_EREFCK */
+	at91_set_a_periph(AT91_PIO_PORTB, 6, 0);	/* ERXDV */
+	at91_set_a_periph(AT91_PIO_PORTB, 8, 0);	/* ERX0 */
+	at91_set_a_periph(AT91_PIO_PORTB, 9, 0);	/* ERX1 */
+	at91_set_a_periph(AT91_PIO_PORTB, 7, 0);	/* ERXER */
+	at91_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* ETXEN */
+	at91_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* ETX0 */
+	at91_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* ETX1 */
+	at91_set_a_periph(AT91_PIO_PORTB, 17, 0);	/* EMDIO */
+	at91_set_a_periph(AT91_PIO_PORTB, 16, 0);	/* EMDC */
+
+	/* Enable clock */
+	at91_periph_clk_enable(ATMEL_ID_GMAC0);
+}
+#endif
+
+static void ma5d4evk_serial_hw_init(void)
+{
+	/* USART0 */
+	at91_set_a_periph(AT91_PIO_PORTD, 13, 1);	/* TXD */
+	at91_set_a_periph(AT91_PIO_PORTD, 12, 0);	/* RXD */
+	at91_set_a_periph(AT91_PIO_PORTD, 11, 0);	/* RTS */
+	at91_set_a_periph(AT91_PIO_PORTD, 10, 0);	/* CTS */
+	at91_periph_clk_enable(ATMEL_ID_USART0);
+
+	/* USART1 */
+	at91_set_a_periph(AT91_PIO_PORTD, 17, 1);	/* TXD */
+	at91_set_a_periph(AT91_PIO_PORTD, 16, 0);	/* RXD */
+	at91_set_a_periph(AT91_PIO_PORTD, 15, 0);	/* RTS */
+	at91_set_a_periph(AT91_PIO_PORTD, 14, 0);	/* CTS */
+	at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+int board_early_init_f(void)
+{
+	at91_periph_clk_enable(ATMEL_ID_PIOA);
+	at91_periph_clk_enable(ATMEL_ID_PIOB);
+	at91_periph_clk_enable(ATMEL_ID_PIOC);
+	at91_periph_clk_enable(ATMEL_ID_PIOD);
+	at91_periph_clk_enable(ATMEL_ID_PIOE);
+
+	/* Configure LEDs as OFF */
+	at91_set_pio_output(AT91_PIO_PORTD, 28, 0);
+	at91_set_pio_output(AT91_PIO_PORTD, 29, 0);
+	at91_set_pio_output(AT91_PIO_PORTD, 30, 0);
+
+	/* Reset CAN controllers */
+	at91_set_pio_output(AT91_PIO_PORTB, 21, 0);
+	udelay(100);
+	at91_set_pio_output(AT91_PIO_PORTB, 21, 1);
+	at91_set_pio_pulldown(AT91_PIO_PORTB, 21, 0);
+
+	ma5d4evk_serial_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_ATMEL_SPI
+	ma5d4evk_spi0_hw_init();
+#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+	ma5d4evk_mci0_hw_init();
+	ma5d4evk_mci1_hw_init();
+#endif
+#ifdef CONFIG_MACB
+	ma5d4evk_macb0_hw_init();
+#endif
+#ifdef CONFIG_LCD
+	ma5d4evk_lcd_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+	ma5d4evk_usb_hw_init();
+#endif
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	at91_udp_hw_init();
+#endif
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
+#endif
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	usba_udc_probe(&pdata);
+#ifdef CONFIG_USB_ETH_RNDIS
+	usb_eth_initialize(bis);
+#endif
+#endif
+
+	return rc;
+}
+
+/* SPL */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+	ma5d4evk_spi0_hw_init();
+}
+
+static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
+{
+	ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
+
+	ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
+		    ATMEL_MPDDRC_CR_NR_ROW_13 |
+		    ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
+		    ATMEL_MPDDRC_CR_NB_8BANKS |
+		    ATMEL_MPDDRC_CR_NDQS_DISABLED |
+		    ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
+		    ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
+
+	ddr2->rtr = 0x2b0;
+
+	ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
+		      10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
+
+	ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
+		      200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
+		      25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
+		      23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
+
+	ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
+		      8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
+}
+
+void mem_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	struct atmel_mpddrc_config ddr2;
+
+	ddr2_conf(&ddr2);
+
+	/* enable MPDDR clock */
+	at91_periph_clk_enable(ATMEL_ID_MPDDRC);
+	writel(AT91_PMC_DDR, &pmc->scer);
+
+	/* DDRAM2 Controller initialize */
+	ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
+}
+
+void at91_pmc_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = AT91_PMC_PLLAR_29 |
+	      AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
+	      AT91_PMC_PLLXR_MUL(87) |
+	      AT91_PMC_PLLXR_DIV(1);
+	at91_plla_init(tmp);
+
+	writel(0x0 << 8, &pmc->pllicpr);
+
+	tmp = AT91_PMC_MCKR_H32MXDIV |
+	      AT91_PMC_MCKR_PLLADIV_2 |
+	      AT91_PMC_MCKR_MDIV_3 |
+	      AT91_PMC_MCKR_CSS_PLLA;
+	at91_mck_init(tmp);
+}
+#endif